G550 Galvalume Steel Coils And Sheets 55% Aluzinc Full Hard JIS GB
GL is more popular in recent years, especially popular in Philipine due to the merits of PPGL, which suitable for the enviroment there well.
Firstly, the corrosive resistance of the hot-dip alu-zinc coated steel sheet is twice to fifth times as mush as that of the hot-dip zinc- coated base metal.
Secondly, it can satisfy the processing requirements of rolling, coiling and others processes alike.
Thirdly, the color won't change while continuously or intermittently working with an ambient temperature up to 316℃.Neither serious oxygenation nor oxide scale might appear while continuously or intermittently working with an ambient temperature up to 490℃.
Thirdly, the heat and the light reflected are respectively twice as much as those of hot-dip zinc steel sheet, and its reflectivity is more than 0.75, exceeding 0.65 (required by the EPA Energy Star Standard), which is an ideal construction material of saving energy.
2. Mechanical properties of hot dip Al-Zn base
Mechanical properties of steel sheet and steel strip should be in conformity with the stipulations of following table.
Due to effects of aging, mechanical properties of the steel strip shall deteriorate with storage time passing, E.g. yield strength and tensile strength will rise, elongation after fracture decreases, formability deteriorates etc. it is suggested to use the material as soon as possible.
|Yield strength (Mpa)
||Tensile strength (Mpa)
For products with nominal thickness greater than 0.50mm, but less than or equal to 0.70mm, the elongation after fracture is allowed to decrease by 2 units. For products with nominal thickness not greater than 0.50mm, the elongation after fracture is allowed to decrease by 4 units.
3. Storage of products
Products should be stored in a dry and ventilated room, instead of being stored in the open air or a place with moisture and a great change of temperature.
The products should be stored in a clean and neat enviroment, preventing from various corrosive substances.
The storage place should be smooth and level, have a good bearing capacity.
Horizontal steel coil should be placed on the brackets with rubber cushions or wooden cushions and be locked with the lock catch on the topside. It mustn't be placed on to the fround or vehicles directly.
To avoid being pressed, the steel coil mustn't be stored in stacking. When the steel sheets are stored in stacking, a limit to every stack should be specified and the sheets with large weight and size should be placed in the lower part of the stack.
The storage of the steel sheets and coils should be scientifically arranged in advance, so as to avoid unnecessary shifting.
Outside: workshop, agricultural warehouse, corrugated roof, wall, retailer booth, roller shutter door, etc.
Inside: door, doorcase, ceiling, elevator, stairway, vent gutter, etc.
2) Electrial Appliance: refrigerator, washer, switch cabinet, desk, bed, micro-wave oven, bread maker
3) Furniture: central heating slice, lampshade, chifforobe, desk, bed, locker, boofshelf
4) Others: writing panel, garbage can, billboard, etc.
Standard Seaworthy Export package including:peripheral anti-rust board, inside anti-rust paper, plastic cannula, latitude strapping, radial srapping, etc.
6. Our service:
1) Free sample offered;
2) Flexible payment term with L/C at sight,TT ,ect;
3) Big quantity supply and short delivery time;
4) Stable and reliable quality
5) Long term after-sale service.