WUHAN HANKE COLOR METAL SHEET CO., LTD.
Good base zinc, good surface color, and every layer has its value.
Payment & Shipping Terms:
|Width:||600MM-1250MM||Coil Weight:||3MT -5MT|
|Substrate:||Baowu Group Or Other Reliable Chinese Steel Mill||Painting:||KCC, Akzo Nobel, Becker, Two Tiger, Etc.|
aluminium sheet coil,
aluminum roofing coil
Printing Pre Painted Aluminum Coil Polyester Paint JIS G3322 Red Color
1. Descprition about base metal
Galvalume is the result of an ideal alloy of aluminum and zinc. It consists of aluminum(55%), zinc(43.4%), and silicone(1.6%).
Characteristics of Galvalume:
1) Corrosion resistence:
At verious enviromental conditions, GL shows better corrosion resistence than GI if the thickness is same, its service life is 2 to 6 times than ordinary galvanized steel. The corrosion resistence in the machining parts is much better than that of hot-dip galvanized due to micro cracks demormation parts of aluminum zinc plate is smaller than hot-dip galvanized.
2) Heat resistence:
GL plate can be used for a long time even if under 315℃.
3) Heat reflective
The reflection coefficient is double than that of hot-dip galvanized steel, which can reduce the inner tempeture in summer
2. Technical Specifications
|Coil Id||508mm, 610mm|
|Surface||Chromated, Oiled / Unoiled, Dry|
|Spangle||Zero Spangle, Minimized Spangle, Regular Spangle, Antifinger|
|Coil Weight||3-15mt or as customer’s request|
|Packing||Standard Export Packing|
|Application||Architecture,Electrical Home Appliances, Auto Mobil, Receptacle, Traffic, etc.|
|Payment Term||BY T/T or L/C|
|Shipment||BY container or bulk|
3. Information to be supplied by the purchaser
The following information is required from the purchaser so that we may supply the products to confrom with the requirements:
1) complete designation
2) where appropriate, details on the required decorative properties(color, gloss, embossing, printing) and required subsequent surface treatment
3) other requirements on the characteristics of the products
4) nominal dimensions of the product related to the substrate
6) internal and maxinum external diameter and mass limit for coils, or limit dimensions and mass limit for the bundles of sheets
7) type of test and type of inspection document
8) slection of the test methods and specification of the mininum or maximum calus for the relevant properties
9) requirements on packing and dispatch
Outside: workshop, agricultural warehouse, corrugated roof, wall, retailer booth, roller shutter door, etc.
Inside: door, doorcase, ceiling, elevator, stairway, vent gutter, etc.
2) Electrial Appliance: refrigerator, washer, switch cabinet, desk, bed, micro-wave oven, bread maker
3) Furniture: central heating slice, lampshade, chifforobe, desk, bed, locker, boofshelf
4) Others: writing panel, garbage can, billboard, etc.
5. Quality Assurance
HANKE has already passed the authentification by the ISO9001, ISO14001 and KS D 3520 in succession and established a completed set of quality assurance system, and under this system, there has a complete set of regulations for ordering, order handling, quality design, purchasing raw materials, working production schedule, production, test, inspection, packaging, storage, delivering, etc.
6. Our Advantage: Strictly Quality Control of Production
Inspection for quality of surface coating on the line supervises and controls the apperance effectively to ensure the quality of coating.
The testing for physical performance follow the principle of one coil, one sample. In order to have traceability of every coil's quality, we test T bend, impact, cupping, MEK, gloss, chromatism to ensure quality. Ultraviolet aging test and Salt spraying test apply to special requirement products.